Your Cutting-Edge remodeling construction Resource

residential construction costs louisville ky Article

Residential Construction Costs Louisville Ky
Residential Construction Estimating
Residential Construction Loan Excel Spreadsheet
Residential Construction Loans Georgia

Bathroom Ideas to Make Your Bathroom Look Larger

- Use Colors: Painting the bathroom a different color can make it appear bigger instantly. Some colors will make it appear smaller though so be careful in your choice. Bold bright colors are the way to go if you want the bathroom to have the illusion of being a larger space. Repainting not
only provides instant results but it is less expensive than remodeling the entire room.

- Tiles: It matters greatly what size tiles are used for the floor and walls of your bathroom. Normally larger cut tiles give the room the effect of looking larger and smaller tiles make it appear smaller. Extending the bathroom tiles from the floor to the wall will give the bathroom the illusion of
space.

- Bathroom cabinets: The size of the bathroom looks bigger if the appropriate cabinets are put up carefully. Along with giving you extra storing space, cabinets also give your bathroom a much neater and cleaner look. Rather than hanging cabinets that 'eat' up space, opt for small floor cabinets.

- Doors: Putting in slide doors instead of the normal doors can make your bathroom feel bigger. Slide doors essentially make your bathroom look less cramped.

In implementing these tips, remember- blend them in with the theme of your bathroom...

By: Joe Boyd
For more excellent ideas to spiff up your Bathroom, Please stop by my Bathroom Decor site. You also might find information about Beach Bathroom Decor]]>
Residential Heating And Cooling With Geothermal Heat Pumps
The term geothermal literally means Earth/Ground (Geo) Heat (thermal). Geothermal, or ground source heat pumps, take advantage of the constant ground or groundwater temperatures. These heat pumps use geothermal energy to heat and/or cool your home.

A refrigerant loop with a compressor extracts heat from one side (the ground) and pumps it to the heating loop in your home. It is essentially the same process that happens in your refrigerator: heat is extracted via a compressor and refrigerant loop from the inside of your refrigerator/freezer and rejected into your house.

In the summer the geothermal heat pump reverses its cycle, if you have an air-conditioning system, and heat from the home is rejected into the ground or ground water.

What makes geothermal heat pumps such a good choice for residential heating and cooling is that they do not depend on outside air temperatures. These heat pumps will heat your home as efficiently on a windy, zero-degree winter day as on a 40-degree day. Provided of course, that your house is well insulated and tight.

Geothermal heat pumps are also a very efficient way for heating and cooling your home. They use 25-50% less energy than conventional heating and cooling systems (Source: US DOE).

Residential applications of geothermal energy systems use water-to-water or water-to-air heat pumps.

Water-to-Water Geothermal Heat Pumps

Water-to-water geothermal heat pumps are generally used for heating only. They replace the gas or oil furnace that you might currently have to heat your home and water with.

It is important to know that heat pumps work most effectively when the temperature difference between the heat source (ground) and heat sink (floor heat or radiators) is small.

Ground temperatures range anywhere from 50 to 75 degF, depending on where you live. This means that geothermal heat pumps are generally not suitable for standard hot water baseboard applications, which are designed for heating water temperatures of 180 degF. Floor heat and low-temperature radiators require water temperatures in the range of 95 to 140 degF.

Some newer heat pump models are now equipped with so-called desuperheaters that can transfer excess heat from the geothermal heat pump compressor to the domestic water heater. Your geothermal heat pump can also effectively and quickly heat water for your bathtub, shower and sinks.

Water-To-Air Geothermal Heat Pumps

These types of ground source heat pumps are generally used when you need air conditioning. The Water is the heat sink, where you reject the heat from the house. The Air is the air that is distributed through your home via duct work.

Otherwise, these heat pumps function the same way as water-to-water heat pumps. And again, the efficiency of a geothermal heating and cooling system is far better than that of a traditional system.

Important To Know

The first step towards making a geothermal heat pump system be a reliable and efficient heating (and cooling) system for your home is to minimize the heating and cooling requirements with a well-insulated building envelope and strategically placed windows for passive solar gain.

Not only is your first cost reduced, because your system will be smaller. You will also tremendously increase the comfort of your home.

Geothermal heat pump systems are best designed and installed by professionals. It is not recommended to DIY. These systems must meet specific requirements. Especially the piping laid out in the ground, or down to the ground water table, must be designed and installed correctly to ensure that your geothermal heat pump system works as intended.

By: Christiane Perrin
Christiane Perrin is a registered professional HVAC engineer with a passion for the environment. She is excited about the building industry going green and wants to support homeowners on their journey to building and remodeling green homes.
http://www.greenandsustainablebuildings.com]]>
How To Build A Patio
BUILDING A GARDEN PATIO

Building a garden patio with brick or stone pavers is probably the best way to accomplish any patio project. Laying the correct patio can be a relaxing and idylic retreat for those lazy summer days, but that's why it is important that you make the right choice. That means you have to make sure it is ideally positioned in your garden.

You should not erect/build your patio in an area where it will be isolated, but consider to build it in an area with the best views. This means that the positioning is especially important, I would place my patio in a positioned where I get the sun and a degree of privacy! But this is personal preference and is upto you and your lifestyle.

DIFFICULTY LEVEL CONCRETE PATIO OR BRICK?

To build a garden patio can be very satisfying and look really good. The work is fairly straightforward if you are relatively decent with your hands. The first and foremost points to remember are good planning and preparation, without the two you will find the project harder than you expected and your results will be sub-standard.

Remember to look at the positioning of the sun, not a massive point but none the less a factor worth considering! Check out your landscape, have you got any trees obstructing the light?

YOUR CHOICE

The patio can be many shapes and designs, but if you're not confident, then it is probably best to have a square patio, although a circular one is also possible, but you would have to start cutting bricks. Circular patios can be purchased from most do-it-yourself stores and at reasonable prices.

Don't forget that you will need at least two inches on the edges to place brick edging. Clear the area you have chosen by digging it out to a depth of about 8/9 inches. Make a frame up the same size as your project and place it around the edges. Don't forget you will need to put a slight slope onto your patio to enable rainwater to run freely off. Make sure you run the slope off in the opposite direction of the house and below any damp courses!

After this you should now do a run with your bricks just to make sure everything is lined up and going to fit.

PRACTICAL GUIDE

Pour Lime Stone or any hardcore aggregate into the area to a depth of about 5/6 inches. When the area is covered with this you need to tamper it down ideally with a whacker plate. Alternatively, get a plank of wood about 8" wide by 3" thick and as long as needed and simply place it across the hardcore and hit it down with a lump hammer.

Once this procedure is completed you now need to place a weed blanket over the area to protect your patio from weeds growing up through the surface. Now you can pour your sand and it must be a minimum of 2/3 inches deep. You now need a screed to level the sand , check for a good level up against your framework.

START LAYING BRICKS

At this stage you can begin to lay your brick. Make sure you have a line to keep you on the straight and narrow. Keep checking for level as you go along laying your bricks. Always start at a corner and work your way along, you will need a rubber mallet at this point to gently tapp the bricks into place whilst using a spirit level for trueness.

Assuming you will be using standard 4 x 8 bricks at 2 inches thick, you can continue with the weave pattern this pattern looks good and is very effective because it interlocks the bricks very well and makes for a stronger job! Once your bricks are laid you need to put sand on top and sweep this into the cracks and crevices.

SIT BACK AND ENJOY THE VIEW

If you are using paving slabs then the principles are basically the same. But remember to continuously check for the right level, using pavers will probably be quicker but visually just as effective. Any cutting you need to do can be done with either a grinder, hammer and chisel or a brick splitter, I recommend purchasing a simple brick/paving slab splitter.

By: Dane Plant
http://buymyworld.com]]>
Does Vinyl Siding Add Value to Your House?
Home improvements are a great way to get more money for your home when you get ready to sell it. But some improvements will bring more value to your home than others. Recently, installing vinyl siding has been recognized as the best thing you can do to add value to your home. Here are a few of the reasons this improvement is the single-best thing you can do for your "bottom line" when selling your house.

It looks good. Vinyl siding comes in a variety of colors and styles to fit your preferences. But in addition to that, the trim and soffits complement your home's color perfectly. You can even get several accessories to complete the look for your home that you want to create. Whether you have a ranch home, a modern-style home or a turn-of-the-century Victorian, you can find a style of vinyl siding that matches your needs.

It lasts for decades. Vinyl siding is the most popular type of siding now. Its durability adds to its popularity because it stands up to rain, snow, sleet, and rain. It won't crack or peel in the sun or hot weather. And it can take a beating without showing signs of wear and tear. If the neighborhood kids hit it with a ball, it won't dent or scratch like other types of siding. When it needs a cleaning, all you need to do is rinse it with soap and water. Afterwards, it looks like you just added a fresh coat of paint to it.

It's a great value. When you get ready to sell your home and you add vinyl siding to it, you can usually recoup about 100 percent of the money you spent for the siding. Sometimes you can add even more value to the house than what you spent for the siding. Vinyl siding is typically less expensive than aluminum, too. And you don't need to worry about people ripping off the siding to sell at the scrap yard, either.

It's easy to do. Many handy homeowners have been able to install their vinyl siding without hiring a professional company to do it for them. This can save you hundreds or even thousands of dollars depending on the size of your house. It's more flexible and you don't have to worry about creases in the metal or deep cuts from the jagged edges.

If you have to choose which home improvement project to do for your home, vinyl siding should be at the top of your list. With its appearance, durability, and affordability, it's the best thing you can do for your home's overall value.

By: Jeff Lundquist
Jeff works in Edina, Minnesota home of the first indoor mall. His website provides information about Edina realty. If you are looking for a property in Edina his site has a search of the Edina MLS along with information on Edina homes.]]>
Suspended Ceilings - What Types Are There?
Suspended ceilings are like a second ceiling, it is placed underneath the existing ceiling and is used to hide pipelines or ductwork. They are generally attached and suspended on wires from the ceiling above and are laid out in a grid where tiles are fitted in. Suspended ceilings can be made with a lot of materials, for example, wood.

Once the suspended ceilings have been installed you can fit in fluorescent lights or install air ducts etc. They are used a lot to cover up this kind of work anyway so suspended ceilings being installed to cover air ducts can easily be integrated in. Also you can install insulation into your suspended ceilings which absorbs heat and sound.

Suspended ceilings are also implemented so that maintenance can take place in the void that is made when the ceiling is installed.

When designing and purchasing your suspended ceilings you are going to need to decide whether or not you want the ceiling to be demountable or completely non-accessible. If you make you suspended ceilings demountable then this will allow you to easily access the ceiling void and perform maintenance on the ceiling or on other objects that the ceiling is concealing. If you make your suspended ceiling non accessible then you will not be able to perform ceiling maintenance easily as you will not be able to get into the ceiling void.

You should consider the above very seriously as the ceilings will need to be redone if you wish to be able to change a non accessible ceiling into a demountable one.

There are many different types of suspended ceilings systems but all are different depending on your requirements yet the concept is the same. For example there is the free span suspend ceiling system that is mainly used for corridors. This kind of system is made up of ceiling planks which are held by the perimeter trim on their short edges. This kind of system can be installed quickly and pretty easily, also it can produce a very nice effect when finished which is usually smooth. These types of suspended ceilings can be made de-mountable for maintenance or non-accessible; if you opt for the de-mountable type then the ceiling planks are removed to allow you your easy access.

Another suspended ceiling system is the bandraster system; these types of suspended ceilings are very flexible and can be made to match with any kind of building architecture. Once again these suspended ceilings can be made accessible or non accessible. These suspended ceiling are design with either concealed or exposed sections which link up to achieve lateral bracing, therefore these systems can be modified to fit any building.

Another system is the exposed suspended ceilings system which is another system which can be installed quickly and efficiently and also allows for you to do maintenance work in the ceiling void easily. These types of suspended ceilings have tiles slotted into a suspended grid allowing for it to be edited easily as well.

I hope this has helped in your search for your suspended ceilings.

By: Tony Savour
AMF Ceilings ]]>
Home Improvements That Increase Energy Efficiency (and Save You Money)
Why should you care about energy efficiency?

Perhaps the biggest reason is to save money. A home that isn't energy efficient takes more energy to heat in the winter and cool in the summer. This means you are spending extra money every month on energy bills, bills that can be significantly lowered by undertaking a few simple home improvements.

The key to making your home more efficient to correct air-flow problems. Make sure air is flowing where it needs to be and isn't flowing where it shouldn't be.

A few small cracks in your home can be as bad for your heating and cooling as a window left open. Older homes frequently have undergone small changes to accommodate updated wiring, and this can be an energy sink. Caulk all small holes where wires go through walls or floors. Check brick facades and the outside of your home for small cracks and signs of wear that may be counteracting insulation.

If your home has a chimney make sure it is sealed with high-temperature cement and metal flashing. Keep the flue closed when it is not in use to prevent air flowing indoors from it. Tight fitting glass covers can also help keep cold air where it belongs.

Plumbing stacks also need to be sealed on the outside. In general look for any holes between the attic and the heated space and seal them as much as possible. Use weather stripping on the entry to the attic as well as insulation on the attic-side of the door.

Now, how's your insulation? Making sure you have enough insulation is key to keeping your home efficient. 18 inches of fiberglass batting or cellulose will greatly improve your heating and cooling systems. The attic does need air flow, however, so make sure air vents are clear and unobstructed.

Each window needs to be checked to make sure it closes completely and locks. Windows can be weather stripped just like doors. Outlets and switches provide access for cold air to enter, but this can be prevented by installing foam gaskets behind them. Child-safety plugs for the outlets also reduce cold air flowing from the sockets.

Old windows and doors need to be checked every year. If one doesn't fit properly, seal it with caulking or weather stripping. If the piece is warped heavily replace it with a new energy efficient model. Expanding foam is also an option to use around door- and window-frames.

Every hole on the outside face of your home can increase inefficiency. Seal laundry vents, water faucets, electrical outlets, and other hookups. Install storm- windows and doors where you don't already have them to create a buffer of air that retains heat and coolness. When it comes time to change siding, add foam insulation behind it.

Basements and crawlspaces need to be checked and sealed. If you have a crawlspace, place a layer of plastic over it to help insulate. Regular basements with concrete walls can be a major problem for efficiency. Consider adding insulation and drywall over the concrete.

Appliances are rated for their efficiency. Choose products with Energy Star ratings and choose compact fluorescent light bulbs that fit in standard sockets.

These fairly inexpensive home improvements can save you a lot of money in the long run. It's definitely worth taking steps to increase your home's efficiency, and as you can now see, it's not even that hard.

By: TC Thorn
TC Thorn has written more articles on home improvements and energy efficiency at Luxury Housing Trends. Her article on green kitchen appliances discusses improving energy use in the kitchen.]]>
Frequently Asked Questions About Fireplace Design
Here are some frequently asked questions, and answers, about fireplaces.

1 - How high should a fireplace chimney be with respect to the height of the house, and what features of design affect its efficient operation?

ANSWER: A chimney should extend at least three feet above flat roofs and at least two feet above the ridge of a peak or hip roof. Solid masonry is the most commonly used material. Satisfactory performance of a chimney flue is determined by its size, direction, shape, height, tightness and smoothness.

2. Is there a particular kind of mortar that should be used in fireplace construction? How is it mixed and where is it used?

ANSWER: The brick around a fireplace and flue should be laid with cement mortar, since it is more resistant than lime mortar to the action of heat and flue gases. The best to use, except on firebrick, consists of one part portland cement, one part hydrated lime, and six parts clean sand. Firebrick is best laid in fire clay.

3. What is the purpose of a damper, and how is it constructed?

ANSWER: A damper affords a means of regulating the draft and prevents excessive loss of heat from the room when the fire is out. It consists of a cast-iron or steel frame with a lid hinged so the width of the throat opening may be varied from a closed to a wide-open position.

4. What is the proper procedure for connecting the chimney to the roof so as to guard against fire, and to allow for expansion due to temperature changes, settlement, or slight movement of the chimney during heavy winds?

ANSWER: Where the chimney passes through the roof, provide for a two-inch clearance between the wood framing and the masonry. The chimney must be flashed and counterflashed to make its junction with the roof watertight. Corrosion-resistant metal, such as copper, galvanized metal, zinc, aluminum, or lead is best for the counterfiashing. When tin is used, paint it well on both sides.

5. Is it necessary that a flue be lined, and if so, what are the advantages in lining it?

ANSWER: Chimneys can be built without linings, but those with linings are more efficient. When the flue is not lined, the mortar and bricks directly exposed to the action of fuel gases disintegrate. This disintegration and that occuring from changes in temperature often cause cracks in the masonry, which reduces the draft.

6. What is the proper way to build the smoke shelf?

ANSWER: The smoke shelf should be made by setting the brickwork back at the top of the throat to the line of the flue wall for the full width of the throat. The depth can vary from six to twelve inches or more, depending on the depth of the fireplace.

7. Does the kind of fuel to be burned have anything to do with the selection of a fireplace design, and does the size of the opening affect the operation?

ANSWER When a fireplace design is being selected, the kind of fuel to be burned should be considered; also, the design should harmonize with the room in proportion and detail. Years ago, when cordwood was plentiful, fireplaces seven feet wide and five feet high were common, but they required large amounts of fuel and were often smoky. Where cordwood is cut in half, a 30-inch width is desirable for a fireplace, but where coal is burned, the opening can be narrower. Thirty inches is a practical height for the fireplace where the width is less than six feet. The higher the opening, the greater the chance of a smoky fireplace. In general, the wider the opening the greater should be the depth.

Following these guidelines, a satisfactory chimney may be selected.

By: Russell R. Freeman
Would You Like Tips On Fireplace Design?
I've Got Loads Of Great Ideas And Expert Advice To Help Design Your Fireplace.
Click Here For Free Ideas: http://www.fireplace-design.org/]]>
East Meets West - Asian Kitchen Design
Asian kitchens are truly elegant and symmetrical in nature because of the fine attention to finish and detail. If you're eyeing on getting the same clean and chic style, make sure you know the right colors to use, the decors and the materials. Consistency and symmetry are two of the most important qualities of an Asian kitchen. Here are a few guidelines for yours.

The Materials

Bamboo immediately creates a wonderful Asian feel to your kitchen. You can use bamboo independently as a plant decoration. However, other more creative ideas would be to split it then line your cupboards, one part of the wall or chairs. You can also line the lower areas of your island counter or sink. Smaller bamboo stalks with leaves can be glued on to cabinet doors and areas over the sink for a Japanese feel.

Silk is very versatile and adds some Chinese influence into your Asian kitchen. You can buy silk with beautiful prints and hang them on the wall. Other silks preferably dark red, orange and pink can be made into table cloths, mats and coasters. Install a wooden frame over the island counter and hang white silk on it together with pots, pans and utensils.

Chrome is very popular among Asians. Choose chrome silver or gold pans, pots and utensils. You can select your refrigerator, oven, stoves and sinks in this manner too. Accessorize drawer pulls and knobs with by choosing chrome ones. The gleam of this material will help add to the sleekness and symmetry that you are trying to create.

Asian Colors and Decors

Popular Asian colors are red, white, black and dark brown. To add an oriental feel, use some gold on red or black with red. Silver also provides a cooling accent. Chrome kitchen utensils, pots and pans will give a nice contrast. Use 3 to 4 main colors at most. You may want to use plants as well to neutralize everything. A single flower on a vase is stylish enough. Assorted fruits in a large bowl or dish also look great.

Setting chopsticks, Thai toothpicks and other native pieces will compliment your overall theme. Utilitarian rice chests are very aesthetic and useful. Hand-forged ironware are very bold as well so you may want to use one or two only at most. You can store condiments in them when not in use. Feel free to add or mix furniture with different Asian influences. Japanese cabinets will still provide a warm effect beside exotic woodworks from Korea.

By: Tim Lee
For more kitchen design ideas, visit http://www.kitchendesignideas101.com.]]>

Below, you'll find extensive information on leading residential construction costs louisville ky articles and products to help you on your way to success.

Vista Remodeling: Offering You Bathroom Remodeling Services
Your home is a place where you find comfort and solace when the day ends after your stressful work. Due to this and several other reasons, you need to make your house as comfortable as possible. What is more, you also need to make it appear cheerful and bright. If your house lacks a homey atmosphere, it requires improvement. You do not have to remodel or renovate all of the rooms of your home all at once. But if your budget is not limited, then why not go for a complete home remodeling? On the other hand, you can choose to work through room by room if you are relying on a small budget. Among the renovation projects that you might want to start with is bathroom remodeling. You can choose to have the whole space enhanced and decorated. Or else, you can opt for minor jobs like the installation of shower doors or new toilets.

There are several companies which provide home remodeling assistance. One of these is Vista Remodeling, which is based in Denver. Whether you want interior repairs or home improvement services, the company can provide you with it. During the start of Vista Remodeling in 1999, it aided with simple and less complicated projects. But as the company keeps on growing, it gradually turned into an enterprise which is extremely professional. As of the current times, Vista Remodeling has the capability to provide you with complex home enhancement jobs, along with quality services. The company is specializing on projects like flooring solutions, granite counter top installation, bathroom remodeling, kitchen remodeling, and basement finishing.

This enterprise has

HEADLINES FOR JANUARY 23, 2006
(2) Corruption Issues at World Bank Coming to a Head
(3) Portugal Gets First Rightist as President Since 1974
(4) Oil Development in Chad Faces Crisis Situation
(5) Canada Set To Put Conservatives in Control
(6) WTO Talks Stilled Stalled Over Who Needs to Change First]]>

completed several projects, one of which is Aurora CO Bathroom Kitchen Remodeling. No matter the size of the job, you can ask for the assistance of Vista Remodeling. It offers free home improvement consultations and free estimation of expenditures. You can even let the company find affordable materials for construction and have these delivered to your address. Vista Remodeling believes that its clients should be treated well all throughout the duration of the project. But this does not stop here since you can consult with the company if you have any problems with the job that it has performed. What is more, you are provided with a 12-month warranty to the services that it has done for you.

If you want to have your bathroom remodeled, there are certain things which you have to consider first. The most important thing which you should look into is the length of time that this space will be of use. You should make sure that the renovation done will last for a long time. Another thing which you have to consider is the maintenance of the bathroom. There are other things to look into when it comes to the remodeling of your bathroom. Rest assured that Vista Remodeling will be able to help you out with this decision in order for you to acquire the bathroom that you have always desired.








Vista Remodeling is specializing on projects like flooring solutions, granite counter top installation, bathroom remodeling , kitchen remodeling , and basement finishing.